Introduction
Polysaccharides are macromolecules composed of more than 20 monomeric sugars linked by glycosidic bonds, and produced by plant, animal, and microorganisms including bacteria, fungi, and microalgae (Osemwegie et al., 2020). Polysaccharides currently used at the industrial level are primarily originated from higher plant and seaweed (Mahapatra and Banerjee, 2013). However, microbial polysaccharides have received increasing attention as alternative sources of industrial polysaccharides due to their cost-effective production compared to plant and seaweed (Salimi and Farrokh, 2023).
A number of microorganisms secrete polysaccharides into their surrounding environment, which are referred to as extracellular polysaccharides or exopolysaccharides (EPSs). In microorganisms, EPSs play a role in cell protection from harsh environmental conditions and antibiotics (Kumar et al., 2007). They are easier for extraction and purification compared to intracellular polysaccharides (Osemwegie et al., 2020), and bacterial EPSs have been intensively studied for their various bioactivities, including antimicrobial, antiviral, anticancer, antioxidant, and immunomodulatory activities (Salimi and Farrokh, 2023).
In fungi, some higher basidiomycetes, filamentous fungi, and yeasts produce EPSs consisting of various sugar units such as glucose, galactose, mannose, and xylose (Mahapatra and Banerjee, 2013). Similar to the bacterial EPSs, fungal EPSs possess various bioactive properties which can be applied in food, cosmetic, medical, environmental, and agricultural areas (Osińska-Jaroszuk et al., 2015). The most well-known fungal EPSs include pullulan and scleroglucan produced by Aureobasidium pullulans and Sclerotium spp., respectively (Smelcerovic et al., 2008). Pullulan is used as a food ingredient in Japan, and classified as Generally Recognized as Safe (GRAS) in the United States. It is used as an excipient in pharmaceutical formulations, a food-coating agent, and an emulsifying agent in cosmetics (Saadat et al., 2021). Scleroglucan is a high molecular weight non-ionic branched glucan, and has been used for petroleum recovery, functional foods (low-calorie foods), and viscosity control in civil engineering (Castillo et al., 2015). However, compared to bacterial EPSs, fungal EPSs remain largely unknown.
Considering the various and valuable bioactivities of microbial EPSs, it is important to explore novel resources of microbial EPSs and their bioactivities. In this study, we isolated and characterized EPSs produced by the marine fungus Gibellulopsis serrae strain JJ-W1. We investigated production of EPS of JJ-W1 cultured using different carbon sources and the collagenase-inhibitory activities of EPS. In addition, we analyzed functional groups and structural features of the EPSs using Fourier transform infrared spectroscopy (FT-IR). This study aims to provide fundamental information on the production and collagenase-inhibitory activity of EPSs produced by the marine fungus G. serrae JJ-W1.
Materials and Methods
1. Sample collection and fungal isolation
Seawater was collected from Jeju Island, located off the southern tip of Republic of Korea (33°23′43.2″N 126°14′22.1″E), diluted with sterile distilled water. The diluted samples were spread on potato dextrose agar (PDA; BD Difco, USA) and yeast extract-peptone-dextrose (YPD; BD) agar containing 0.01% (w/v) ampicillin (Sigma-Aldrich, USA) and 0.01% (w/v) streptomycin (Sigma-Aldrich), and incubated at 25℃ for 7 days. After incubation, fungal colonies were picked and transferred on fresh PDA media to obtain pure colonies. After isolation, the fungal strains were stored in 20% glycerol at −80℃. Fungal strains were cultured on PDA at 25℃ unless otherwise described. JJ-W1 was deposited in the Korean Collection for Type Cultures (strain number KCTC 16178BP) and Marine Microbial BioBank (MMBB) culture collections of National Marine Biodiversity Institute of Korea (MABIK) (strain number MABIK FU00001484).
2. DNA extraction, polymerase chain reaction (PCR), and phylogenetic analysis
Genomic DNA (gDNA) was extracted by incubating JJ-W1 in potato dextrose broth (PDB; BD, USA) at 25℃ for 7 days on a 150 rpm, followed by gDNA extraction from the collected mycelia using the phenol:chloroform method previously established by Chung et al., (2019).
For molecular identification of strain JJ-W1, sequences of two genetic markers, internal transcribed spacer (ITS) and partial translation elongation factor 1–α (TEF1–α) of rDNA were amplified and analyzed. PCR was performed using the primers ITS1F (5′–CTTGGTCATTTAGAGGAAGTAA–3′) and ITS4 (5′–TCCTCCGCTTATTGATATGC–3′) to amplify the ITS regions (Gardes and Bruns, 1993). For amplifying the TEF1–α regions, the primers EF1-983F (5′–GCYCCYGGHCAYCGTGAYTTYAT–3′) and EF1-2218R (5′–ATGACACCRACRGCRACRGTYTG–3′) were used (Rehner and Buckley, 2005). The PCR products were purified using a PCR purification kit (Qiagen, Germany). DNA sequencing in the forward and reverse direction was performed by Macrogen Inc. (Republic of Korea).
The amplified fragments of the ITS and TEF1–α genes were assembled using the Geneious v9.0.5 software. The ITS and TEF1–α sequences of JJ-W1 were used as queries for a BLASTN search (https://blast.ncbi.nlm.nih.gov/Blast.cgi) to evaluate sequence similarity. Phylogenetic analyses based on the ITS and TEF1–α genes were generated using Kimura-2 model and the neighbor-joining method in MEGA X (Kumar et al., 2018). The clade support was assessed through 1,000 bootstrap replicates (Felsenstein, 1985).
3. Production of EPS in JJ-W1
Following cultivation on PDA at 25℃ for 7 days, fungal spores of JJ-W1 were scraped off and suspended in phosphate-buffered saline (PBS). JJ-W1 (3 mL of the fungal suspension at 1 × 107 conidia) was inoculated in 200 mL of fermentation media with different carbon sources (glucose (GY), maltose (MY), or sucrose (SY)), and incubated at 28℃, 150 rpm for 5 days. The components of 1 L of the fermentation media were as follows: 50.0 g of glucose (GY), maltose (MY), or sucrose (SY), 1.0 g yeast extract, 2.25 g NaNO3, 2.0 g K2HPO4, 0.5 g MgSO4·7H2O, 0.5 g KCl, 0.05 g FeSO4·7H2O, and 0.7 g citric acid.
Culture supernatants were obtained by centrifugation at 11,000 rpm for 15 minutes at 4℃, and the resulting pellets were lyophilized to determine the biomass dry weight using a freeze dryer (Labconco Corp., USA). The collected supernatants were the deproteinated by trichloroacetic acid (TCA, 10% w/v) method for 18 hours at 4℃ (Zhong et al., 2022). After TCA treatment, the clarified solutions were centrifuged at 11,000 rpm for 20 min and subsequently filtered through a 0.22 μm membrane filter to remove residual cell debris and proteins. For EPS precipitation, cold absolute ethanol was added to the supernatants (ethanol : supernatants = 2:1, v/v) and stored overnight at 4℃. The precipitates (crude EPSs) were collected by centrifugation at 11,000 rpm for 15 min, washed with 70% ethanol. Following lyophilization, the EPSs were weighed and dissolved in distilled water to a final concentration of approximately 10 mg/mL. Subsequently, the EPSs were dialyzed against distilled water using a Slide-A-Lyzer G2 with a molecular weight cut-off of 3.5 kDa cassette (Thermo Fisher Scientific, USA) overnight at 4℃. The dialyzed EPSs were lyophilized and stored at −20℃ until use. The phenol-sulfuric acid method was used to quantify the EPS content (Chaplin and Kennedy, 1986).
4. Fourier-transform infrared (FT-IR) spectroscopy
The infrared (IR) spectra of fungal EPSs were obtained using a FT-IR spectrophotometer (PerkinElmer, Spectrum 3, USA) equipped with a diamond crystal ATR (attenuated total reflectance) sampling device. The spectra were scanned at room temperature in the range of 4,000–700 cm−1 with a resolution of 4 cm−1. Spectra were acquired and processed with the SpectrumIR software (PerkinElmer).
5. Collagenase inhibition Assay
Collagenase inhibitory activities of EPSs were evaluated using EnzCheck Gelatinase/Collagenase assay kit (E12055, Molecular Probes, USA) according to the manufacturer’s instructions. Briefly, 80 μL of EPS samples were combined with 20 μL of a fluorescence-labeled gelatin substrate and 100 μL of 0.1 U/mL collagenase purified from Clostridium histolyticum, then thoroughly mixed. Samples were incubated at room temperature, protected from light. The fluorescence intensity was measured at every 15 min for 1.5 h using 485 nm excitation and 520 nm emission wavelengths.
6. Statistical analysis
Statistical analyses were conducted using one-way analysis of variance (ANOVA) followed by Tukey’s multiple comparison test using GraphPad Prism (version 5.0). Unless otherwise specified, all experiments were performed in triplicate.
Results and Discussion
1. Identification of JJ-W1
When grown on PDA at 25℃ for 7 days, JJ-W1 formed a white to cream-colored colony (Figure 1A). For molecular identification, the 566-bp ITS and 891-bp TEF1-α sequences of JJ-W1 (accession numbers PV785191 and PV788699 in the GenBank database, respectively) were used for phylogenetic analysis. In a neighbor-joining phylogenetic tree, the JJ-W1 ITS sequence was clustered with Gibellulopsis serrae CBS 290.30T with a 99% degree of confidence (99.8% sequences similarity) (Figure 1A). Consistently, the phylogenetic tree constructed using the TEF1-α sequence showed JJ-W1 was grouped with three strains of G. serrae (CBS 120008, MFLUCC:23-0308, and CBS 290.30T) with a high bootstrap value of 99% (Figure 1B). Taken together, JJ-W1 was identified as a G. serrae.
Gibellulopsis serrae (also known as Cephalosporium serrae) belongs to the family Plectosphaerellaceae, and has been isolated from plant (Amaranthus tricolor) and freshwater (Giraldo and Crous, 2019;Cheon et al., 2025). Majority of the species in the family Plectosphaerellaceae are soil-borne saprobes or plant pathogens. Fungi of the genus Gibellulopsis are generally understudied, and G. nigrescens, the most well-studied species among them, is known to cause yellow wilt on Chinese cabbage and mild wilt in sunflower. Although EPS production by G. serrae has been reported (Stasinopoulos and Seviour, 1989), its bioactivities remain largely unexplored.
2. The effect of carbon sources on production of EPSs in G. serrae JJ-W1
We investigated production of EPSs in JJ-W1 cultivated using different carbon sources including glucose, maltose, and sucrose (Figure 2). Among the tested carbon sources, glucose led to the highest EPS yield in fungal cultures (56.13 ± 4.12 mg/L). The EPS production was similar in media supplemented with sucrose (23.58 ± 1.36 mg/L) and maltose (18.40 ± 0.49 mg/L) (P > 0.05). Likewise, glucose also yielded the highest EPS production relative to biomass (10.04 ± 0.63 mg/g). Biomass-based EPS production was comparable between sucrose (3.76 ± 0.15 mg/g) and maltose (4.18 ± 0.09 mg/g) (P > 0.05). Therefore, we selected glucose as a carbon source to characterize G. serrae EPS.
Glucose, maltose, and sucrose are the most influential carbon sources for EPS production by fungi (Mahapatra and Bajerjee, 2013). Which carbon sources are most preferred for fungal EPS production varies depending on the fungal species and other culture conditions. When glucan production was previously assessed from G. serrae strain C34 grown on different carbon sources, glucose led to 1.74- and 1.84-fold higher glucan yield relative to maltose and sucrose, respectively (Stasinopoulos and Seviour, 1989). Due to differences in the media compositions used in the experiments, direct comparisons of the results is difficult. However, glucose is likely to be the preferred carbon source for G. serrae EPS production compared to sucrose and maltose.
Interestingly, although biomass production was higher in the sucrose-containing medium than in the glucose-containing medium, EPS production was greater when glucose was used as the carbon source. This observation suggests that EPS production is not necessarily correlated with biomass accumulation. Previous studies on fungi such as Paecilomyces hepiali, Cordyceps militaris, and Phellinus vaninii have reported that different carbon sources can alter carbon flux distribution between cell growth and EPS biosynthesis, resulting in discrepancies between biomass accumulation and EPS yield (Wu et al., 2014;Mani et al., 2015;Xu et al., 2017). Moreover, the difference may be attributed to the distinct metabolic pathways by which fungal cells utilize glucose, a monosaccharide, and sucrose, a disaccharide, for growth and EPS production. In general, glucose can be directly taken up by fungal cells and metabolized rapidly, whereas sucrose metabolism requires hyrolysis before uptake. However, the efficiency with which carbon sources are utilized for growth may vary among fungal species and strains (Rodrigues et al., 2021).
3. Inhibition of collagenase by G. serrae EPS
Anti-collagenase activities delay skin aging process such as loss of skin elasticity and formation of wrinkles. Studies investigating the inhibitory effects of fungal polysaccharides on collagenase activity are limited, with the majority of research focusing on polysaccharides derived from mushrooms including Volvariella volvacea and Amauroderma rugosum (Sangthong et al., 2022;Shiu et al., 2025). To date, the anti-collagenase activity of EPSs derived from the genus Gibellulopsis has not been reported.
The collagenase inhibitory activity of G. serrae-derived EPS was evaluated at different concentrations and enzyme reaction time (30, 60, and 90 min). As shown in Table 1, the collagenase inhibitory rate increased in a concentration-dependent manner. At the highest concentration examined (20 mg/mL), EPS exhibited nearly complete inhibition of collagenase activity, with inhibitory rates of 100% at 30 and 60 min and 99.93% at 90 min.
At 10 mg/mL, strong inhibitory activity was still observed, whereas a pronounced decrease in collagenase inhibition was observed at lower EPS concentrations. The lowest inhibitory activity was detected at 2 mg/mL, showing collagenase inhibitory rates of 10.68%, 8.21%, and 6.86% at 30, 60, and 90 min, respectively.
The IC50 values were calculated based on the collagenase inhibitory rates and are summarized in Table 1. The IC50 values were 6.21 ± 0.26 mg/mL at 30 min, 6.49 ± 0.19 mg/mL at 60 min, and 6.61 ± 0.19 mg/mL at 90 min. These values indicate that the inhibitory potency of G. serrae EPS against collagenase was largely maintained across different reaction times, with only a slight increase in IC50 observed as reaction time increased.
Overall, these results demonstrate that G. serrae EPS exhibits strong and concentration-dependent collagenase inhibitory activity, while reaction time exerts a relatively minor influence on its inhibitory potency.
4. Fourier-transform infrared spectroscopy (FT-IR)
FT-IR spectroscopy was employed to identify the major functional groups and chemical bonds present in the EPS samples within the wavelength range 4000–700 cm−1 (Figure 3). The FT-IR spectra of EPSs produced using different carbon sources exhibited characteristic absorption bands typical of fungal polysaccharides.
A broad band at 3600–3200 cm−1 corresponds to the stretching vibrations of hydroxyl (O–H) groups, which are abundant in polysaccharide chains (Sardari et al., 2017). A weak absorption band near 2933 cm−1 (3200-2800 cm−1 range) is attributed to the asymmetric and symmetric C–H stretching vibrations of aliphatic CH2 groups (Zaghloul et al., 2024). These features are commonly associated with carbohydrate-based macromolecules.
Distinct absorption bands at approximately 1634–1644 cm−1 were observed, corresponding to C=O stretching vibrations of the amide I band and vibrations related to conjugated C=C and C=O bonds. These signals may indicate the presence of polyphenolic components associated with the EPS, as similar absorption features have been reported for polysaccharides containing bound polyphenols (Harki et al., 1997;Radzki et al., 2019;Fornal et al., 2023). Additionally, weak bands detected at 1532–1539 cm−1 correspond to the amide II band, which is mainly attributed to N–H bending vibrations (Sardari et al., 2017;Radzki et al., 2019). The absorption region between 1400 and 1200 cm−1 is associated with C–H bending vibrations of polysaccharide backbones and the stretching vibrations of carboxyl (COO−) groups, suggesting the presence of acidic functional groups within the EPS structure (Choudhuri et al., 2020;Zaghloul et al., 2024).
The spectral region between 1200 and 1000 cm−1 represents the characteristic carbohydrate fingerprint region and is mainly attributed to C–O stretching vibrations and C–OH bending vibrations of sugar rings, as well as –C–O–C– glycosidic linkages (Peng et al., 2010;Fornal et al., 2023). The presence of absorption bands in this region indicates O-substituted glucose residues linked through glycosidic bonds, confirming the polysaccharide nature of the EPS. This region is widely used for the identification and classification of polysaccharides due to its sensitivity to structural variations (Kačuráková et al., 1998;Kačuráková et al., 2000).
Absorption bands observed in the range of 950–750 cm−1 are associated with α- and β-glycosidic linkages connecting sugar units (Synytsya and Novák, 2014). In the EPS produced using glucose as a carbon source, weak signals at approximately 915 and 880 cm−1 suggest the coexistence of both α- and β-glycosidic linkages. In contrast, EPSs produced using sucrose and maltose exhibited weak absorption bands near 920 and 917 cm−1, respectively, which are indicative of β-glycosidic linkages. The absorption band around 915 cm−1 is characteristic of β-glycosidic bonds, similar to those reported for (1→3)-β-D-glucans with (1→6) branching, such as those isolated from Lentinula edodes (Kim et al., 2003; Peng et al., 2003; Lim et al., 2005). These results suggest that EPS produced from glucose contains both α- and β-glycosidic linkages, whereas EPS derived from sucrose and maltose predominantly contains β-glycosidic bonds. Furthermore, weak absorption bands observed at 809–807 cm−1 indicate the possible presence of mannose residues within the EPS structure (Lim et al., 2005;Cao et al., 2013).
In general, EPSs produced by ascomycetous fungi are heteropolysaccharides composed of various monosaccharide units, including glucose, galactose, mannose, xylose, and rhamnose (Osińska-Jaroszuk et al., 2015). Even EPSs composed of identical monosaccharide units can exhibit different molecular weights and structural architectures depending on fungal species, culture conditions, and carbon sources, due to variations in chain length and branching patterns (Mahapatra and Banerjee, 2013). Since molecular weight, degree of branching, and conformational features are known to influence the biological activities of fungal polysaccharides (Xiao et al., 2020;Salimi and Farrokh, 2023), further structural characterization of G. serrae EPSs using high-performance liquid chromatography (HPLC), gas chromatography–mass spectrometry (GC–MS), gel permeation chromatography, and nuclear magnetic resonance (NMR) spectroscopy will be necessary to elucidate the relationship between EPS structure and collagenase inhibitory activity (Ruthes et al., 2016).
Conclusion
In this study, an EPS-producing fungus JJ-W1 isolated from marine sediment was identified as Gibellulopsis serrae based on phylogenetic analyses. Among the carbon source tested, glucose was the most effective for EPS production, yielding significantly higher EPS levels than sucrose and maltose. The EPS produced by G. serrae JJ-W1 exhibited concentration-dependent collagenase inhibitory activity with IC50 values of approximately 6.2–6.6 mg/mL across different reaction times. FT-IR analysis confirmed the polysaccharide nature of the EPS and suggested the presence of characteristic carbohydrate functional groups, including α- and β-glycosidic linkages. These findings indicate that EPS derived from G. serrae JJ-W1 has potential as a bioactive polysaccharide with anti-collagenase activity and may represent a candidate for application related to skin health and anti-aging. Further studies on detailed structural characterization and the relationship between EPS structure and biological activity will help clarify its functional potential.






